Surface feeding under water - for exposed locations
Reliable equipment for efficient work processes
-
- 27/03/2023New Rotor spreader with High Performance bearingsRead More
With double High Performance low-friction bearings in corrosion-free material, this rotary spreader will have a longer service life than spreaders with ordinary bearings.
-
- 03/09/2021Brattland Multifeeder - feeding on the surface and under waterRead More
An ingenious further development of the Brattland Subfeeder. Designed so that it is almost impossible to clog. And you now have the option of combining surface feeding and underwater feeding: Dynamic feeding!
We are now launching the 2023 model, with an improved bottom part. A total of 32 feed outlets in the bottom frame + center dose in Ø500 pipe.
Why feed the salmon deeper? When the lice larva is ready to attach, it swims towards the surface regardless of light conditions
- 02/08/2021Solar Cell AutomatRead More
Achieve 100% growth and low feed factor in the important smolt phase, without time-consuming hand feeding.
- 30/11/2020SPREADER FLEETRead More
Spreader fleet with the new quattro spreader installed. The new model of the quattro spreader is from 2016. This gives greater spread than the previous model, is 100% maintenance free, and gets no feeding stop or reduced feeding due to malfunction.
- 30/11/2020Feedhose holderRead More
Feedhose holder to be mounted on handrail. Avoid feedhose getting twisted out of position when feeding from the handrail.
- 26/06/2020FEED HOSE STATIONRead More
Newly developed feed hose station that is self-floating and can be moored in the facility between the rings. The hoses are attached in separate grooves to each hose. Here you can use our quick straps for fast attachment.
- 26/06/2020HAMSTER WHEEL WITH INTEGRATED SPREADERRead More
As Norway's only supplier, we can now offer hamster wheels with a newly developed and patented spreader integrated into the hamster wheel.
- 26/06/2020HATCHERIES SPREADERRead More
Newly developed fish spreader in electropolished acid-resistant steel. Very good spread.
- 26/06/2020SMOLT FEED SPREADERRead More
Brattland smolt feed spreader made of electropolished acid-resistant steel. Here shown in a 90m cage. Incredibly large and even spread.
- 26/06/2020Underslung diffuserRead More
The Brattland underslung diffuser for mounting under the feed pipe. Constructed from electrically polished, acid-resistant steel. The diffuser has no moving parts and is virtually maintenance free.
- 24/06/2020Feed floatRead More
The feed float ensures relaible delivery of feed to the middle of the fish cage and right above any feed measuring devices. The feed float is 11 meters long and 7,5 meters wide and a heigth between 4 to 5,5 meters.
- 24/06/2020Overslung feed spreaderRead More
Brattland overslung feed spreader for 6-12 mm feed. Constructed from electrically polished, acid-resistant steel. The spreader has no moving parts and is virtually maintenance free.
- 06/02/2019Ladle for smolt feedRead More
Great ladle that throws and distributes the smolt feed well.
- 18/11/2023Rope tamp holderRead More
Rope tamp holder with fiberglass rod and PE fasteners/bracket.
-
- 14/04/2023Pipe ladderRead More
Solid and impactful pipe ladder, perfect for mounting on feedbarges where there is a risk of boats coming into contact.
- 16/11/2022Collection tank in PE for petrol tank 900LRead More
Robust collection tank in PE for petrol tank and other chemical containers of 900l.
- 07/09/2022Desinfeksjonskar for avkastnot 4200LRead More
Solid disinfection tank built in PEHD plastic, with acid-proof drain valve.
Like most of our products, we can adapt this to the customer's own measures.
- 29/03/2022Veterinary table in PERead More
Solid veterinary table in PE design, with drainage pipe integrated in the table top to collect waste in a bucket.
- 21/04/2021Ring-ladderRead More
Solid ring-ladder that easily secures with our quick straps. Perfect when using tubenets.
- 22/09/2020Lockable chemical cabinetRead More
Lockable chemical cabinet, with 5 compartments. There is room for 4 oil cans, and 1 separate for accessories. This cabinet can of course be adjusted to the customers needs.
- 26/06/2020BRATTLAND NETLINERRead More
The Brattland Notliner can replace the heaviest and most harmful job in today's aquaculture industry. The Brattland Netliner has a load capacity of up to 70 kg. In normal netting by hand, the power is from 30 to 50 kg.
On average, you can normally line 2pcs 120m cages on one charge.
- 26/06/2020CHEMICAL COLLECTION TANKRead More
This lockable tank is adapted to a 1000 l IBC container. Meets the requirement of 110% collection. There is room for pump in the collection tank. Dimensions: L130cm x W 110cm x H130cm. In total it holds 1859 liters.
- 26/06/2020LOCKABLE CHEMICAL CABINET FOR ENGINE ROOM ON BOAT / RAFTRead More
Where chemicals are stored, it is required to have a collection container that is tight and lockable. The cabinet is made of strong PE material.
- 26/06/2020EMERGENCY ESCAPE BOXRead More
Smart and neat storage of escape nets, with clear marking of the size of the yarn. The box is easily taken into the boat and yarn is set straight from the box. Made of high-impact and environmentally friendly PE material. Size 100x60x60cm, but we make these on other dimensions if desired.
- 26/06/2020MOVING CARTRIDGE FOR LUMPFISHRead More
Moving cartridge for easy, efficient and gentle fishing of lumpfish. The lumpfish swims into the shed itself. The box is lifted out of the cage and placed on the deck of the work boat and is easily emptied into new cage. The lumpfish are moved in a separate water bath.
- 26/06/2020LUMPFISH HOUSERead More
With its smooth outer edges, the house protects the fish from wear and tear. The lumpfish houses can be easily cleaned by taking them into the boat, flushing them and putting them out again. The houses are solidly built and therefore become a one-time investment that can be used indefinitely.
- 19/09/2023Licecounting fleet / WorkfleetRead More
Powerful raft of 4x3m with railings, light mast and fasteners for hanging electrical cabinets/accessories.
- 11/10/2022LICE COUNTING TUB WITH AWAKENING PART IN PERead More
Lice counting table 90⁰ with a circular design and awakening part without corners, so the fish don't get stuck. White plastic tub for easy observation of lice. No painted surfaces.
- 11/10/2022Licecountingtable straight versionRead More
Lice counting table with anesthetic tank in circular design and wake-up part without corners, so that the fish do not get stuck. Tub in white plastic for easy observation of lice. No lacquered or painted surfaces. Shown here as the straight version.
- 05/07/2022Custom made lice counting tableRead More
We are happy to produce lice counting tables tailored to your exact needs. We only need a sketch or idea of the desired solution.
- 29/03/2022Veterinary table in PERead More
Solid veterinary table in PE design, with drainage pipe integrated in the table top to collect waste in a bucket.
- 16/02/2022Glove MegaOil 67cm for lice countingRead More
Fully dipped gloves with oil and acid resistant PVC coating, perfect for lice counting.
-
- 19/09/2023Licecounting fleet / WorkfleetRead More
Powerful raft of 4x3m with railings, light mast and fasteners for hanging electrical cabinets/accessories.
- 05/12/2022Floating dock for aquacultureRead More
We deliver solid floating docks to aquaculture customers. The entire construction is in PE plastic, with non-slip GRP grates as a cover.
-
- 26/06/2020FLOATING DOCKRead More
We supply floating docks of all sizes, from Ø315mm to Ø630 pipes. We supply three main types of brews: complete docks with undercarriage, docks with welded end caps and fastening ears, or just pipes with welded end caps and fastening ears.
- 01/03/2020Mooring bollard in PERead More
Strong bollard produced in 40mm PE.
Delivered without mounting holes, more flexible in terms of mounting. Easy to drill holes even with a regular wooden drill.
-
- 05/09/2023Buoyancy element for power cablesRead More
When removing the feed barge, you can hang the power cable in this buoyancy element.
-
- 20/12/2022Akvapartner cage bracketRead More
Solid and flexible cage brackets for plastic cages. The included adapter means that it also fits steel posts. Fits most cages.
-
- 07/09/2022Desinfeksjonskar for avkastnot 4200LRead More
Solid disinfection tank built in PEHD plastic, with acid-proof drain valve.
Like most of our products, we can adapt this to the customer's own measures.
- 29/03/2022Veterinary table in PERead More
Solid veterinary table in PE design, with drainage pipe integrated in the table top to collect waste in a bucket.
-
-
- 22/09/2020Power cabinet mountRead More
Power cabinet mount that fits up to 160mm handrail and 200mm post. Specify when ordering.
- 26/06/2020BIRD NET HOLDERRead More
Bird net holder with a curved top for minimal bird wear. The top is reinforced with intersecting plates welded to the pipe arch. Sizes 4m, 5m and 5.5m.
- 26/06/2020BOATSRead More
BIC Sportyak 245 – the market's safest and most stable boat in this size! The catamaran hull provides extreme stability. Two people can stand on the same side without a problem. Sportyak 245 works great for fishing and transporting equipment and should be self-contained in the cabin. Molded in thermoformed ABS plastic for extreme durability.